T30-M Air Driven Pump Motors

T30-M Air Driven Pump Motors

TURBOTWIN T30-M Air Driven Pump MotorsDesigned for Operating Pre-and Post-Lube Systems and Seal Oil Pumps on Less Air. The efficient T30-M turbine motor delivers the industry's highest torque using significantly less air than any competitive air motor.  The result is greater capability for continuous duty operation.  The T30-M can provide up to four hours of continuous duty operation with no burn-out, freeze-ups or worries about lubrication of the drive air.  It's simply not required.  Furthermore, the TurboTwin turbine design eliminates the maintenance, mess and failures associated with traditional vane-type motors.

No Oil. No Emission Problems.

To further simplify the function of pre-and post-lube pumping, T30-M comes grease packed for life.  This means no messy oil and no lubrication requirements.  The supply air requires no prelubrication, thus eliminating hazardous fugitive emissions and the environmental concerns that go with them.

TurboTwin is the Most Reliable. Here's Why.

TDI turbine motors not only last longer than vane motors, but they are less susceptible to  damage by field contaminants that cause breakdown.  Dirt, sand, rust and other contaminants that lodge inside and destroy vanes, simply pass through the turbine open air path design.  Humidity, salt air, or moisture that cause vane parts to stick or swell have no effect.  Add to that no rubbing parts, no plastic parts, and the industry's fewest moving parts, and the T30-M stands above the rest for maintenance-free operation.

Sour Gas? Bring It On!

Intake of sour gas is inevitable.  It happens, and when it does, your vane motor shuts down.  T30-M will not.  Sour gas poses no problem to the industry's most reliable air motor.

Maximum Power. Minimum Air.

T30-M optimizes the amount of torque delivered to the driven member, and it does it with less air.  Compare that with any competitive model and you'll find that no one delivers more on less.

Remote Locations and Cold Weather are Ideal Conditions for T30-M

Control lines and electrical wiring to faraway locations not only complicate installation, but add to the list of things that can cause failure.  Remote locations are perfect applications for T30-M because there is no need for separate control or wiring.  And T30-M requires no pre-lubricated supply air, meaning the problems associated with oil at cold temperatures are no problem at all.

Easy Installation

At only 29lbs (13kg), installation is a one-person operation.  No sophisticated wiring or control hook-ups either.  Piping is easy too.  Only one supply line plus a ball or relay valve.

More than Just a Pump Motor

By significantly improving the reliability of pre-lube and post-lube pumping functions, the T30-M further assures the reliability of your gas turbine engine.  The relentless operation of these turbine motors assures that when you have to be on-line pumping gas, your pre-lube operation won't be the thing that stops you.